BOS® CLEANER 750p
This machine is the professional’s choice for cleaning, disinfection and coating of large ducts.
The machine is an excellent choice for circular and rectangular 315-1200mm ducts. The hose for chemicals and air facilitates efficient working in difficult conditions. While the brush is rotating, you can also apply a jet of pressurized air, thus making the cleaning process more effective. Using the liquid nozzle you can also disinfect or coat the duct surfaces.
BKT8603000
The BOS® Cleaner 750p brushing machine has a very good reach – up to more than 65 metres in both directions from a maintenance door. Due to the roller bearing of the support axle, the flexible cleaning shaft is easy to feed and reel in. An air valve controls the speed and direction of rotation. The brush is pneumatically powered.
- Lockable swivel front wheels
- Cleaning shaft guide stainless steel (Aisi 304)
- Full rubber drum support wheels (with MS bearings)
CLEANING BRUSHES:
- Basic brushes, M12, PP bristle
- Brush with nylon centre, Pes bristle, Ø 0.50mm
- Brush with nylon centre and disc, Pes/Nylon bristle, Ø 0.70mm
- Brushes with nylon centre, Nylon bristle, 1.0mm
- Brushes for special cleaning with nylon centre, Tynex/Nylon
- Fat brushes M-12, Nylon Ø 2.5mm
ACCESSORIES:
- Brush adapter for nylon centre brushes
- Air nozzle
- Liquid nozzle
- Oil sprayer for air motor
- Low pressure sprayer
| Power source | Compressed air |
| Motor | LFB3R |
| Required air supply, motor | Optimum 400 l/min 6 bar (3,8 Nm (stall 6,5 Nm)) |
| Required compressor capacity | 400-600 l/ min, 6 bar max 8 bar |
| Required air supply | 300-600 l/min |
| Brush rotation speed | controllable |
| Noise | 78,5 dB (A) |
| Brush coupling | M 12 |
| Material housing/drum | Painted steel/Marine aluminium EN AW 5754 |
| Dimensions (height*width*length) mm | 1200*500*1060 |
| Weight kg | 44 kg |
| Cleaning shaft length | 40m |
| Wheels | Ø 250 mm/ Ø 100 mm lockable swivel wheels |
| Max. brush size | Ø 1200 mm |